DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
215
Figure 6 - 42 CPU Access Rule Detail Information window for IP
To establish the rule for a previously created CPU Access Profile:
To configure the Access Rules for IP, open the
CPU
Access Profile List
window and click
Add/View Rules
for an
IPv6 entry. This will open the following window.
Figure 6 - 43 CPU Access Rule List window for IPv6
To remove a previously created rule, click the corresponding
Delete Rules
button. To add a new Access Rule, click
the
Add Rule
button:
Figure 6 - 44 Add Access Rule window for IPv6
To set the Access Rule for IPv6, adjust the following parameters and click
Apply
.
Parameter Description
Access ID (1-100)
Enter a unique identifier number for this access. This value can be set from
1
to
100
.
Action
Select
Permit
to specify that the packets that match the access profile are forwarded by the
Switch, according to any additional rule added (see below).
Select
Deny
to specify the packets that match the access profile to be filtered.
Class
Enter an IPv6 Class. The class can be between
0
–
255
.
Flow Label
Configuring this field, in hex form, will instruct the Switch to examine the flow label field of the
IPv6 header. This flow label field is used by a source to label sequences of packets such as non-
