D-Link DHP-328AV, User Manual

10

D-Link DHP-328AV/DHP-329AV User Manual

Section 2 - Installation

3. Second Adapter

Within two minutes of pushing the Simple connect button of the first adapter, press Simple connect button of second adapter 

in your Powerline network for no more than three seconds. The Power LED will start blinking after you release the button.

Note: Both Simple connect buttons must be pressed within two minutes.

After above network security setup steps, your Powerline network will be securely configured with the same network encryption 

key. The adapters will memorize the security settings even if they are unplugged. 

Note: To change the private encryption key, please reset the adapter back to its default value by pressing the Simple Connect 

button for 10 second and then follow the security setup procedure above.

4. Adding More Adapters

If you would like to add more than two adapters, press the button of the additional adapter for no more than three seconds. 

The Power LED will start blinking after you release the button. 

Then press the button of any adapter in your existing Powerline network for no more than two seconds. The Power LED will 

start blinking after you release the button.

Note: Both Simple connect buttons must be pressed within two minutes.

After above network security setup steps, your Powerline network will be securely configured with the same network encryption 

key.