18
D-Link DHP-600AV/DHP-601AV User Manual
Appendix A - Technical Specifications
Technical Specifications
1 Maximum throughput is based on theoretical transmission PHY rate. Actual data throughput will vary. Network conditions and environmental factors, including volume of traffic and network overhead, may lower actual data throughput rate. Interference from devices that emit electrical
noise, such as vacuum cleaners and hair dryers, may adversely affect the performance of this product. This product may interfere with devices such as lighting systems that have a dimmer switch or a touch-sensitive on/off feature, short wave radios, or other Powerline devices that do not
follow the HomePlug AV standard.
2 Power outlets and electrical wiring must all be part of the same electrical system. Certain electrical conditions in your home, such as wiring condition and configuration, may affect the performance of this product. Additional D-Link Powerline AV series products are required to add new devices
to the network. A minimum of two D-Link Powerline AV series products are required to create a network. Connecting this product to a power strip with a surge protector may adversely affect the performance of this product. For best results, plug the adapter directly into a wall outlet.
General
Powerline Interface
• Power plug (country-dependent)
Ethernet Interface
• Gigabit Ethernet LAN port
• RJ-45 connector
Functionality
Standards
• IEEE 802.3
• IEEE 802.3u
• IEEE 1901
• HomePlug AV2
Security
• 128-bit AES data encryption
LEDs
• Power
• Ethernet
• Powerline
Powerline Modulation Scheme
• OFDM symbol modulation
Powerline Frequency Band
• 2 MHz to 86 MHz
Data Rate
• Ethernet: 10/100/1000 Mbps (autonegotiation)
• Powerline: Up to 1000 Mbps (PHY rate)
1
Physical
Dimensions
• 68.5 x 54 x 25.1 mm (2.7 x 2.13 x 0.99 inches)
Weight
• US: 73 grams (2.58 ounces)
• AU: 79 grams (2.79 ounces)
• EU: 80 grams (2.82 ounces)
• UK: 84 grams (2.96 ounces)
Power
• Input: 100 to 240 V AC, 50/60 Hz
Power Consumption
• < 3.0 W
Temperature
• Operating: 0 to 40 °C (32 to 104 °F)
• Storage: -20 to 65 °C (-4 to 149 °F)
Humidity
• Operating: 10% to 90% non-condensing
• Storage: 5% to 95% non-condensing
Certifications
• CE
• FCC
• UL
• CE/LVD
