9
D-Link DHP-P338AV User Manual
Section 2 - Installation
Hardware Installation
Power
Plug in the DHP-P338AV into an AC wall outlet. Note that it is not recommended to connected the DHP-P338AV to
a power strip or UPS.
Note:
Power source is confirmed when the Power LED on the DHP-P338AV is illuminated.
Connect the Ethernet Cable
Connect the included Ethernet cable to the Ethernet port
located on the DHP-P338AV and attach the other end of
the Ethernet cable to your PC or Ethernet device. Network
Connectivity is confirmed when the Ethernet LED on the
DHP-P338AV is illuminated.
Power Saving Mode Enabled
When the Ethernet link activity has been down for 5 minutes,
the DHP-P338AV will automatically go into power saving
mode. The Power LED will blink intermittently.
WARNING!
D-Link powerline devices cannot be configured while in
Power Saving Mode.
NOTEBOOK (High Priority)
PRINTER (Medium Priority)
2
ROOM A
ROOM B
DHP-P338AV
DHP-P338AV
EXISTIng PLC nETWORK
SET TOP BOX (Highest Priority)
Router
Internet
ROOM C
1
ROOM C
DHP-P338AV
NOTEBOOK
(High Priority)
SET TOP BOX
(Highest Priority)
PRINTER
(Medium Priority)
DHP-P338AV
NOTEBOOK
(High Priority)
SET TOP BOX
(Highest Priority)
PRINTER
(Medium Priority)
