30
Using the Configuration Menu (continued)
Tools> Admin
At this page, the DI-524 administrator can change the system password. There are two
accounts that can access the Broadband Router’s Web-Management interface. They
are admin and user. Admin has read/write access while user has read-only access.
User can only view the settings but cannot make any changes.
Remote Management-
Remote management allows the DI-524 to be configured
from the Internet by a web browser. A username and password is still required to ac-
cess the Web-Management interface. In general, only a member of your network can
browse the built-in web pages to perform
Administrator
tasks. This feature enables
you to perform Administrator tasks from the remote (Internet) host.
IP Address-
The Internet IP address of the computer that has access to the Broad-
band Router. If you input an asterisk (*) into this field, then any computer will be able
to access the Router. Putting an asterisk (*) into this field would present a security risk
and is not recommended.
Port-
The port number used to access the Broadband Router.
Example-
http://x.x.x.x:8080 where x.x.x.x is the WAN IP address of the Broadband
Router and 8080 is the port used for the Web-Mangement interface.
Administrator-
Password-
admin
is the
Administrator login name
.
Enter the password and enter again to confirm.
User-
Password-
user
is the
User login name
.
Enter the password and enter again to confirm.
