background image

10 

Using the Configuration Wizard   

 

                             

 

 

 

 

 

 

 

   

 

 

       

 

 

 

 

 

 

 

 

Whenever you want to configure 
your network or the DI-524UP, you 
can access the Configuration Menu 
by opening the web-browser and 
typing in the IP Address of the 
DI-524UP. The DI-524UP default IP 
Address is shown to the right: 

 

Open the web browser. 

 

Type in the IP Address of the 
Router   (

http://192.168.0.1

). 

 

Type “admin” in the User 
Name field. 

 

Leave the Password blank. 

 

Click 

OK

.

 

 

The 

Home > Wizard

 window will 

appear. Please refer to the Quick 
Installation Guide for more in-
formation regarding the Setup 
Wizard. 

 

These buttons appear on most of the 
configuration windows in this 
section. Please click on the 
appropriate button at the bottom of 
each window after you have made a 
configuration change. 

NOTE: If you have changed the 
default IP Address assigned to the 
DI-524UP, make sure to enter the 
correct IP Address. 

 

192.168.0.1 

Clicking 

Apply

 will save configured 

settings to the router. 

Clicking 

Cancel

 will clear changes 

made to the current page. 

Clicking 

Help

 will provide the user with 

helpful information about the current 
window.  

Clicking 

Refresh

 will refresh the 

statistics of the current window.

 

Summary of Contents for DI-524UP





























































































Reviews: