13
WEP
– Click the
Enabled
radio button to employ WEP encryption on the router.
WEP Encryption
– Use the drop-down menu to select the type of WEP encryption.
Select
64 Bit
to enabled 64 bit Hexadecimal encryption,
128 Bit
to enable 128 bit
Hexadecimal encryption. For 64-bit encryption, the (ASCII) characters are converted
automatically and listed as 10-digit hexadecimal keys. 64-bit encryption allows you to
select one of four active keys. For 128-bit encryption, the characters are converted and
listed as a 26 digit hexadecimal key. 128-bit encryption allows you to select one of four
active keys. 128-bit keys are to be from 5-13 inputted characters in length and 256-bit
keys must be from 10-26 inputted characters in length. Failing to have the same key on
the server and its clients will result in the clients not receiving any information from the
router or its connected devices.
Key Type
– Use the pull-down menu to select the type of Key to be used for encryption.
The user may choose
HEX
(Hexidecimal) or
ASCII
(American Standard Code for
Information Interchange). Both will require the user to enter a key in the following field.
Key –
The user may enter up to four keys to be used for encryption. Only the key
selected using the corresponding radio button will be used for encryption.
Click
Apply
to set the information in the router’s memory.
(NOTE: For the client
implementation of this function, please see the user manual for the associated client
Summary of Contents for DI-524UP
Page 1: ......
Page 62: ...58 Tools Misc ...
