24
Using the Configuration Menu
Advanced > SNMP
Enable SNMP-
Get Community-
(Simple Network Management Protocol)
Enter the password
public
in this field to allow “Read only”
access to network administration using SNMP. You can view
the network, but no configuration is possible wth this setting.
Set Community-
Enter the password
private
in this field to gain “Read and
Write” access to the network using SNMP software. The ad-
ministrator can configure the network with this setting.
Local-
Remote-
SNMP (Simple Network Management Protocol) is a widely used network monitoring and
control protocol that reports activity on each network device to the administrator of the
network. SNMP can be used to monitor traffic and statistics of the DI-707P. The DI-707P
supports SNMP v1.
WAN (Wide Area Network)
LAN (Local Area Network)
