67
D-Link DIR-2640 User Manual
Section 3 - Configuration
Network
In the Settings menu on the bar at the top of the page, click
Network
to change the local network settings of the router and
to configure the DHCP settings.
Click
Save
at any time to save the changes you have made on this page.
Network Settings
LAN IP Address
Enter the IP address of the router. The default IP address is
192.168.0.1
. If you change the IP address, once you click
Save
,
you will need to enter the new IP address in your browser to
get back into the configuration utility.
Subnet Mask
Enter the subnet mask of the router. The default subnet mask
is
255.255.255.0.
Management Link
The default address to access the router’s configuration is
http://dlinkrouter.local/.
You can replace
dlinkrouter
with
a name of your choice.
Local Domain Name
Enter the domain name (optional).
Enable DNS Relay
Disable to transfer the DNS server information from your ISP
to your computers. If enabled, your computers will use the
router for a DNS server.
