22
D-Link DIR-2680 User Manual
Section 4 - Configuration
Configuration
Enter your password. If you previously followed the setup wizard, please use
the admin password you entered during the wizard. Otherwise, leave the
password blank. Click
Log In
to proceed.
Note:
If you cannot remember your password and cannot log in, press the recessed
reset button on the bottom of the device for longer than 10 seconds to restore the
router to its default settings.
DIR-2680 comes with pre-configured device password. The password is located on
both the Quick Installation Card and on the device label at bottom of the device.
To access the configuration utility, open a web-browser such as Internet
Explorer and enter
http://dlinkrouter.local./
or you may also connect by
typing the IP address of the router (by default this is
http://192.168.0.1
) in the
address bar.
The router’s home page will open displaying its current connection status.
The bar at the top of the page has quick access to Settings, Features, and
Management functions. You may quickly jump back Home at any time.
Note:
The system will automatically log out after a period of inactivity.
