54
D-Link DIR-2680 User Manual
Section 4 - Configuration
Smart Connect
Smart Connect:
Enable or disable the Smart Connect Feature. When enabled, only
a few configuration options are available to simplify configuration.
Wi-Fi Name (SSID):
Create a name for your wireless network using up to 32 characters.
Password:
Create a password to use for wireless security. Wireless clients will
need to enter this password to successfully connect to the network.
Advanced Settings
Security Mode:
Choose
WPA2-Personal
.
Transmission
Power:
Select the desired wireless transmission power.
Schedule:
Use the drop-down menu to select the time schedule that the rule
will be enabled for. The schedule may be set to
Always Enable
, or
you can create your own schedules in the
Schedules
section. Refer
for more information.
Wi-Fi Protected Setup
The easiest way to connect your wireless devices to the router is with Wi-Fi Protected Setup
(WPS). Using WPS-PIN is disabled by default due to security vulnerabilities.
WPS-PBC Status:
Enable or disable WPS-PBC (Push Button Configuration) functionality.
Refer to the next page if you wish to disable Smart Connect or click
Save
when you are done.
From this page you can configure your wireless network settings.
Wireless
