DIR-300
Wireless N 150 Home Router
User Manual
Configuring via Web-based Interface
MAC Filter
On the
Wi-Fi / MAC Filter
page, you can define a set of MAC addresses of devices which will be
allowed to access the WLAN, or define MAC addresses of devices which will not be allowed to
access the WLAN.
Figure 93. The MAC filter for the wireless network.
By default, MAC filtering is not active (the
Disabled
value is selected from the
MAC filter
restrict mode
drop-down list on the
Filter mode
tab).
To open your wireless network for the devices which MAC addresses are specified on the
MAC
addresses
tab and to close the wireless network for all other devices, select the
Allow
value from
the
MAC filter restrict mode
drop-down list and click the
Change
button.
To close your wireless network for the devices which MAC addresses are specified on the
MAC
addresses
tab, select the
Deny
value from the
MAC filter restrict mode
drop-down list and
click the
Change
button.
To add a MAC address to which the selected filtering mode will be applied, proceed to the
MAC
addresses
tab.
Page
116
of 170
