DIR-300
Wireless N 150 Home Router
User Manual
Configuring via Web-based Interface
Figure 108. The page for adding a rule for remote management.
You can specify the following parameters:
Parameter
Description
IP address
A host or a subnet to which the rule is applied.
Mask
The mask of the subnet.
Protocol
The protocol available for remote management of the router.
Public port
An external port of the router. You can specify only one port.
Click the
Change
button.
To edit a rule for remote access, click the relevant link. On the opened page, change the needed
parameters and click the
Change
button.
To remove a rule for remote access, click the relevant link. On the opened page, click the
Delete
button.
Page
141
of 170
