DIR-320NRU
Quick Installation Guide
Wired WAN Connection
1. Go to the
Net / WAN
page, select the
WAN
connection and click the
Delete
button.
2. Click the
Add
button.
3.
In the
General settings
section, in the
Provider
drop-down list, leave
the
Manually
value.
4.
From the
Connection Type
drop-down list, select the needed value.
5. From the
Port
drop-down list, select the
Ports:5
value.
6.
Specify a name for your connection (any name for easier identification) in
the
Name
field.
7. If your ISP uses MAC address binding, in the
Ethernet
section, in the
MAC
field, enter the MAC address registered by your ISP upon
concluding the agreement. To set the MAC address of the network
interface card (of the computer that is being used to configure the router
at the moment) as the MAC address of the WAN interface, click the
Clone MAC Address
button (
). To set the address of a device
connected to the router's LAN at the moment, select the relevant value
from the drop-down list (the field will be filled in automatically).
24
