3
D-Lnk DIR-330 User Manual
Secton 3 - Configuraton
IPSec Settings
Check this box to enable IPSec.
Enter a name for your VPN.
Enter the local (LAN) subnet and mask.
(ex. 192.168.0.0/24)
Select Site to Site or Remote User for the
required VPN configuration.
•
Site to Site - Network-to-network VPN in
which two entire LAN networks are virtually
connected across the Internet. If selected,
enter the destination gateway IP address in
the box which is the public WAN IP or host
address of the remote VPN server endpoint.
•
Remote User – Client-to-server VPN in
which remote VPN clients can to connect to
the router from the Internet and access Local
Network resources.
If
Site to Site is selected, enter the Destination
subnet and mask of the remote network.
(ex. 192.168.1.0/24)
Select Pre-shared Key or X.509 Certificate Authentication. One of these two authentication methods must be selected.
•
Pre-shared Key - Manually enter ASCII passphrase in box.
•
X.509 Certificate - For certificate authentication, certificates must be manually uploaded to the router. See the “Certificates”
section for details.
Enable:
Name:
Local Net/ Mask:
Remote IP:
Remote Local
LAN Net/ Mask:
Authentication:
Summary of Contents for DIR-330 - Wireless G VPN Router
Page 1: ......
Page 66: ...61 D Link DIR 330 User Manual Section 3 Configuration Help ...
