4
DIR-510L Install Guide
Charge and Power On
1
2
3
Peel the protective film from the top and bottom of the device.
Make sure the DIR-510L is charged* or plugged in before using. If you want to
use the device without the power adapter, charge the DIR-510L for four
hours, or until the battery LED indicator is solid green.
Slide the mode switch to
On
. Allow at least one minute for the device to
boot up.
INTERNET
DC IN 5V
Plug In
On
ON
OFF
CHARGER
* Actual usable capacity may vary depending on charging conditions.
Note:
Make sure no USB devices are plugged in while charging the DIR-510L.
