8
DIR-510L Install Guide
Configuring the DIR-510L
Make sure the DIR-510L mode switch is in the
On
position and the device is either charged
or plugged in.
Note:
The Battery LED will be solid green when
the battery is at 80% or higher capacity.
1
3
From your wireless computer or mobile device’s
wireless utility, connect to the DIR-510L. Use the
following default settings:
• 2.4GHz Wi-Fi Name (SSID):
DIR510L
• 5GHz Wi-Fi Name (SSID):
DIR510L_5GHz
• Password: blank by default
2
Open a web browser from your computer or
your mobile device (e.g., Internet Explorer,
Firefox, Safari, or Chrome).
Go to
http://dlinkrouter.local./
or enter
http://192.168.0.1
in the address bar. XP
users should enter
http://dlinkrouter
.
ON
OFF
CHARGER
On
4
At the login screen, leave the
Admin
Password
blank. Click or tap
Log In
to continue.
Note: I
f the password is not blank or if you have
forgotten the password, press the reset button on
the DIR-510L for five seconds with an unfolded
paper clip. This will change your settings to
factory default.