49
D-Link DIR-604 User Manual
Section 3 - Configuration
Select Static IP Address if all the Internet port’s IP information is provided to you by your ISP. You will need to enter in
the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address
entered in the fields must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Router
will not accept the IP address if it is not in this format.
Manual Internet Configuration (Static IP)
Select
Static IP
if you want to manually enter information
provided by your ISP.
Enter the IP address assigned by your ISP.
Enter the subnet mask assigned by your ISP.
Enter the gateway IP address provided by your ISP.
The default MAC address is set to the Internet port’s physical
interface MAC address on the broadband Router. It is not
recommended that you change the default MAC address
unless required by your ISP. You can use the
Copy Your
PC’s MAC Address
button to replace the Internet port’s
MAC address with the MAC address of your Ethernet card.
Enter the primary DNS server address provided by your ISP.
Enter the secondary DNS server address provided by your
ISP.
Maximum Transmission Unit. You may need to change the
MTU for optimal performance with your specific ISP. The
default is 1500.
My Internet
Connection is:
IP Address:
Subnet Mask:
Default
Gateway:
MAC Address:
Primary DNS
Server:
Secondary
DNS Server:
MTU:
