DIR-620S
Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Configuring via Web-based Interface
Wi-Fi Client
This configuration step is available for the
WISP Repeater
,
Repeater
, and
Client
modes.
1. On the
Wi-Fi Сlient
page, click the
WIRELESS NETWORKS
button and select the
network to which you want to connect in the opened window. When you select a network,
the
Network name (SSID)
and
BSSID
fields are filled in automatically.
If you cannot find the needed network in the list, click the
UPDATE LIST
icon (
).
2. If a password is needed to connect to the selected network, fill in the relevant field. Click the
Show
icon (
) to display the entered password.
Figure 42. The page for configuring the Wi-Fi client.
If you connect to a hidden network, enter the network name in the
Network name (SSID)
field.
Then select a needed value from the
Network authentication
list and then, if needed, enter the
password in the relevant field.
When the
Open
or
WEP
authentication type is selected, the following settings are displayed on the
page:
Parameter
Description
Enable encryption WEP
For
Open
authentication type only.
The checkbox activating WEP encryption. When the checkbox is
selected,
the
Default key ID
drop-down list, the
Encryption key
WEP as HEX
checkbox, and four
Encryption key
fields are
displayed on the page.
Default key ID
The number of the key (from first to fourth) which will be used for
WEP encryption.
Encryption key WEP as
HEX
Select the checkbox to set a hexadecimal number as a key for
encryption.
Page
52
of 236
