DIR-620S
Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Configuring via Web-based Interface
Configuring Wireless Network
This configuration step is available for the
3G/LTE modem
,
Router
,
Access point
,
WISP
Repeater
, and
Repeater
modes.
1. On the
Wireless Network 2.4 GHz
page, in the
Network name
field, specify your own
name for the wireless network or leave the value suggested by the router.
2. In the
Password
field, specify your own password for access to the wireless network or
leave the value suggested by the router (WPS PIN of the device, see the barcode label).
3. If the router is used as a Wi-Fi client, you can specify the same parameters of the wireless
network as specified for the network to which you are connecting. To do this, click the
USE
button (available for the
WISP Repeater
and
Repeater
modes only).
4. You can restore the parameters of the wireless network specified before resetting to factory
defaults. To do this, click the
RESTORE
button.
Figure 49. The page for configuring the wireless network.
Page
61
of 236
