DIR-815
AC1200 Wave 2 MU-MIMO Wi-Fi
Router with 3G/LTE Support and USB Port
User Manual
Configuring via Web-based Interface
Bandwidth Control
On the
Advanced / Bandwidth Control
page, you can setup the rate limit for traffic transmitted
from every port of the router.
Figure 142. The
Advanced / Bandwidth Control
page.
By default, the rate is not limited. If you want to limit the rate for traffic transmitted from a port,
select the line corresponding to this port.
Figure 143. The window for setting up rate limit.
In the opened window, move the
Enable
switch to the right and enter the maximum value of the
transmitted traffic rate for this port in the
Maximum rate
field. Then click the
SAVE
button.
If you want to remove the rate limit for this port, move the
Enable
switch to the left and click the
SAVE
button.
Page
183
of 240
