DIR-820
AC1200 Wave 2 MU-MIMO Wi-Fi Router
User Manual
Configuring via Web-based Interface
If the SNMP manager operates over SNMPv2c, create a read-only community which will be used
by the SNMP manager to get data on the device. To do this, in the
Communities
section, click the
ADD
button and specify the community name in the line displayed.
To remove a community, click the
Delete
icon ( ) in the relevant line.
If the SNMP manager operates over SNMPv3, create a read-only user which will be used by the
SNMP manager to get data on the device. To do this, in the
Users
section, click
the
ADD
button (
).
Figure 113. The window for adding a user.
In the opened window, specify the needed parameters:
Parameter
Description
Name
Specify a username for access from the SNMP manager.
Authentication protocol
Select a required authentication method from the drop-down list or
leave the
None
value if authentication is not required.
Authentication
password
Specify a password for user authentication from the SNMP manager.
The field is displayed if the
MD5
or
SHA
value is selected from the
Authentication protocol
drop-down list.
Encryption protocol
Select a required encryption method from the drop-down list or
leave the
None
value if encryption is not required. The list is
displayed if the
MD5
or
SHA
value is selected from the
Authentication protocol
drop-down list.
Page
142
of 210
