DIR-820
AC1200 Wave 2 MU-MIMO Wi-Fi Router
User Manual
Configuring via Web-based Interface
5. If you want to create an additional wireless network isolated from your LAN in the 2.4GHz
band, select the
Enable guest network
checkbox (available for the
Router
and
WISP
Repeater
modes only).
Figure 47. The page for configuring the wireless network.
6. In the
Network name
field, specify your own name for the guest wireless network or leave
the value suggested by the router.
7. If you want to create a password for access to the guest wireless network, deselect the
Open
network
checkbox and fill in the
Password
field.
8. Click the
NEXT
button to continue or click the
BACK
button to specify other settings.
9. On the
Wireless Network 5 GHz
page, specify needed settings for the wireless network
in the 5GHz band and click the
NEXT
button.
Page
58
of 210
