D-Link DIR-820 User Manual Download

Page: 64 / 210

DIR-820

AC1200 Wave 2 MU-MIMO Wi-Fi Router

User Manual

Configuring via Web-based Interface

If you need to configure a connection via VLAN, click the

ADVANCED MODE

button.

Figure 53. The Multimedia Devices Connection Wizard. The advanced mode.

In the

WAN

section, click the

Add

icon

(

)

Figure 54. Adding a connection.

In the opened window, specify a name of the connection for easier identification in the

Name

field

(you can specify any name). Specify the VLAN ID provided by your ISP and click the

SAVE

button.
Then in the

LAN

section, from the

Bridged with

drop-down list of the element corresponding to

the LAN port to which the additional device is connected, select the created connection. Click the

APPLY

button.

The selected port cannot use the default connection to access the Internet.

To deselect the port in the simplified mode, left-click the selected element (the frame will
disappear) and click the

APPLY

button.

Page

of 210

Summary of Contents for DIR-820



















































































































































































































Search results

Summary of Contents for DIR-820

Reviews:

Related manuals for DIR-820

Brands by name

Popular brands

D-Link DIR-820, User Manual

Search results

Summary of Contents for DIR-820

Reviews:

Related manuals for DIR-820

Brands by name

Popular brands