DIR-820
AC1200 Wave 2 MU-MIMO Wi-Fi Router
User Manual
Configuring via Web-based Interface
System Time
On the
System / System Time
page, you can manually set the time and date of the router or
configure automatic synchronization of the system time with a time server on the Internet.
Figure 150. The
System / System Time
page.
To set the system time manually, follow the next steps:
1. Move the
Enable NTP
switch to the left.
2. In the
Time Settings
section, specify needed values. To specify the time set up your PC or
portable device, click the
SET LOCAL TIME
button.
3. Click the
APPLY
button. The
System date
and
System time
fields will be filled in
automatically.
To enable automatic synchronization with a time server, follow the next steps:
1. Move the
Enable NTP
switch to the right.
2. Specify the needed NTP server or leave the value specified by default in the
NTP Servers
section. If you need to specify several servers, click the
ADD SERVER
button.
Page
200
of 210
