6
5
Plug the power adapter into your router and connect to an available
power outlet or surge protector. If the Power LED does not light up, press
the Power button on the back of the router.
6
After the router has powered up, verify that the Power and Internet LEDs are
both lit. Proceed with router configuration.
Open a web browser (e.g., Internet Explorer, Chrome, Firefox, or Safari)
and enter http://dlinkrouter.local./ or the IP address of the router
(http://192.168.0.1).
1
4
3
2
1
INTERNET
POWER
POWER PORT
WPS
Computer
Modem
DIR-822
Configuration
There are two ways to configure your router:
A. Web Browser - Use a web browser from your computer.
B. QRS Mobile app - Use a mobile device with the D-Link QRS Mobile app.
Refer to the
QRS Mobile Setup
section for more information.
A. Web Browser Configuration
4
3
2
1
INTERNET
12V --1.5A
POWER
WPS
Wireless
Computer*
* If you are connecting wirelessly, you may now connect to the router using the supplied Wi-Fi
Configuration Card for the Wi-Fi network name (SSID) and Wi-Fi password.
