D-Link DIR-890L, Quick Install Manual

4

Hardware Overview

1

SS USB LED

A solid white light indicates a USB 3.0 device is connected.

2

USB LED

A solid white light indicates a USB 2.0 device is connected.

3

5G LED

A solid white light indicates the 5GHz wireless function is working properly.
During the WPS process, this light will blink quickly. 

4

2.4G LED

A solid white light indicates the 2.4GHz wireless function is working properly.
During the WPS process, this light will blink quickly.

5

Internet LED

A solid white light indicates a connection to the Internet port. If the LED is
orange, the connection is good but the router cannot connect to the Internet.

6

Power LED

A solid white light indicates a proper connection to the power supply. The light
will be solid orange during boot-up.

7

USB 3.0 Port

Connect a USB flash drive to share content throughout your network. Port
supports USB 3.0 and USB 2.0 devices.

8

USB 2.0 Port

Connect a USB flash drive to share content throughout your network. Port
supports USB 2.0 devices.

9

Reset Button

Press and hold the reset button with a paper clip for ten seconds to reset the
router to the factory default settings.

10

WPS Button

Press to start the WPS process. The 2.4G or 5G LED will blink fast.

11

LAN Ports

(1-4)

Connect Ethernet devices such as computers, switches, and game consoles.

12

Internet Port

Connect a broadband modem to this port using an Ethernet cable.

13

Power Button

Press to power the router on and off.

14

Power Port

Connect the supplied power adapter.

12

8

13 14

11

9 10

7

1

6

5

4

3

2