background image

3

D-Link DIR-X3260 User Manual

Section 1 - Product Overview

Features

Need super-fast Wi-Fi for your wire-free, all-streaming house? With a powerful dual-core processor, the AX3200 Wi-Fi 6 Gigabit Router packs in 

enough processing power to handle every networking task you throw at it. It’s a powerful, intelligent home router with integrated voice assistant 

compatibility for Amazon Alexa and Google Assistant so you can control your network with voice commands.

Handle More with a High-Power Processor

With the DIR-X3260, you’re not only enjoying buffer-free gaming and lightning fast surfing, you’re also enjoying features such as an optimizing 

QoS, an automatic firmware update system that ensures the best protection and the latest features, and compatibility with voice assistants. All this 

is possible with the router’s 1.3 GHz dual-core high-power processor, 128 MB of flash memory and 512 MB of RAM. 

Enhanced Quality of Service Features

The built-in Quality of Service (QoS) engine allows you to prioritize important traffic to ensure that your favorite applications are receiving optimal 

bandwidth.

Always Up-to-Date with the Latest Features

The DIR-X3260 will automatically check daily for updates to make sure that the device always has the latest features and the most secure firmware, 

and will install the update silently in the background. For an extra peace of mind, in the event of failure during the firmware update, the router will 

store a backup system image in the memory before proceeding with the update.

Easy to Set Up and Manage

Sharing your Internet connection doesn’t have to be a complicated process; just download the free D-Link Wi-Fi app for your mobile device and 

follow the on-screen step-by-step instructions to set up your DIR-X3260. You also have the option to use a web browser to access the setup wizard 

and to manage your router. Support for industry-standard Wi-Fi Protected Setup (WPS) lets you create encrypted connections to new devices by 

pressing a button. 

Summary of Contents for DIR-X3260

















































































Reviews: