background image

2

EN

G

LI

SH

#

LED

Status

Description

1

Left:

Ports 1 - 8

Solid 

green

Port is connected at 1 Gbps.

Blinking 

green

The port is undergoing cable diagnostics.

Solid 

amber

Port is connected at 10/100 Mbps.

2

Right:

Ports 1 - 8

Blinking 

green

There is activity on the port at 1 Gbps.

Blinking 

amber

There is activity on the port at 10/100 

Mbps.

3

Left:

Ports 

9 - 10

Solid 

green

Port is connected at 1 Gbps.

Blinking 

green

There is activity on the port at 1 Gbps.

Solid 

amber

Port is connected at 10/100 Mbps.

Blinking 

amber

There is activity on the port at 10/100 

Mbps.

Table 3

Front Panel Connectors

Figure 4

#

Item

Description

1

Reset

This is the reset button which is used to 

perform a factory reset.

2

Console

This is a console port which is used to connect 

to the DIS-200G using a RJ-45 to serial cable.

3

Ports 1 to 10

These are 10/100/1000 Mbps ports that can 

be used to connect to any device using a 

standard Category 5/5e RJ-45 Ethernet cable.

4

Ports 11 to 12

These are 1 Gbps SFP  ports that can be used 

to connect to other switches using compatible 

SFP  adapters and fiber cable.

Table 4

Figure 2

#

LED

Status

Description

1

PoE 

Budget 

100

Solid 

green

The power budget is 100% and no PoE is 

being used.

PoE 

Budget 

75

Solid 

green

The power budget is between 100 and 

75%.

PoE 

Budget 

50

Solid 

green

The power budget is between 75 and 50%.

PoE 

Budget 

25

Solid 

green

The power budget is between 50 and 25%.

Solid 

amber

The power budget is between 25 and 0%, 

but still has more than 15.4 W remaining.

Blinking 

amber

The power budget is between 25 and 0% 

and has less than 15.4 W remaining.

2

Left:

Ports 

1 - 10

Solid 

green

Port is connected at 1 Gbps.

Blinking 

green

There is activity on the port at 1 Gbps.

Solid 

amber

Port is connected at 10/100 Mbps.

Blinking 

amber

There is activity on the port at 10/100 

Mbps.

3

Right:

Ports 1 - 8

Solid 

green

The PoE output is using IEEE 802.3af/at 

and is less than 15.4 W.

Solid 

amber

The PoE output is using IEEE 802.3at and is 

between 15.4 and 30 W.

Blinking 

amber

The PoE output on the port is over 30 W 

and the port has been shut down.

Table 2

DIS-200G-12S/SW

Figure 3

4

3

1, 2

1

3

2

Summary of Contents for Dis-200G Series

















Reviews: