DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
57
More detailed information about the VLAN of the specific interface is displayed.
Click the
Back
button to return to the previous window.
After click the
Edit
button, the following window will appear. This is a dynamic window that will change
when a different
VLAN Mode
was selected. When
Access
was selected as the
VLAN Mode
, the
following page will appear.
TThe fields that can be configured are described below:
Parameter
Description
VLAN Mode
Select the VLAN mode option here. Options to choose from are
Access, Hybrid, and Trunk.
Acceptable Frame
Select the acceptable frame behavior option here. Options to
choose from are Tagged Only, Untagged Only, and Admit All.
Ingress Checking
Select this option to enable or disable the ingress checking
function.
VID
Enter the VLAN ID used for this configuration here. This value
must be between 1 and 4094.
Clone
Tick this option to apply the configuration to the specified ports.
From Port / To Port
Select the appropriate port range used for the configuration here.
Click the
Apply
button to accept the changes made.
Click the
Back
button to return to the previous window.
When
Hybrid
was selected as the
VLAN Mode
, the following page will appear.
Figure 6-19 Configure VLAN Interface - Access window
Figure 6-20 Configure VLAN Interface - Hybrid window
