12
Using the DKVM-16
The “Power On” State of the DKVM-16
When you power on the KVM switch, it will prompt you for the password; the
default value is eight zeros – “00000000”. Please enter eight zeros and enter the
same value in the
retype
field.
Note: If you are not familiar with the operation of the OSD manual, please do not
change the password (i.e. keep the default eight zero value). Otherwise, if you
forget your set password, you will need to contact the supplier (D-Link) to have the
unit reset.
The Push Buttons
Pressing the button allows you to cycle fowards and backwards through all
the ports.
The Display LEDs
When you select one of the sixteen PC ports and the PC is shut down or
disconnected, the selected port LED will flash. When you select one of the
sixteen PC ports and the PC is powered on, the selected port LED is lit.
