25
D-Link DNS-313 User Manual
Section 3 - Configuration
Easy Search Utility
After the hard disk has been completely installed with the
Click n’ Connect Utility, follow the instructions below to
change the device IP settings and use the Easy Search
Utility to map the drive to your Windows computer.
Click the
Easy Search Utility
link. A new menu appears.
The DNS-313 will appear listed under
Network Storage
Devices
. If none are listed, click the
Refresh
button. If
a DHCP server is active on your network, the DNS-313
will receive an IP address by DHCP. If no DHCP server
is present, the IP address 192.168.0.32 is used.
See the “Utility Overview” section on page 26 for more
information on how to use Easy Search utility.