D-Link DNS-31 User Manual
Section 3 - Configuration
Replacing or Adding a New Hard Drive
It is recommended that you backup your important files before replacing or adding a new hard drive to the DNS-321.
Replacing a Hard Drive:
Please make sure the power is off before replacing a hard drive. After you have installed the new drive, turn on the
DNS-321 and then connect to the Web UI. The DNS-321 will prompt you to format the new drive (Standard, RAID 1
mode) or both drives (JBOD, RAID 0 mode).
Adding a New Hard Drive:
The DNS-321 is able to work with one single hard drive under Standard mode. Please make sure the power is off before
installing a second hard drive.
After you have installed the new drive, turn on the DNS-321 and then connect to the Web UI. The DNS-321 will prompt
you to format the new drive.
Note: Formatting a hard drive will erase the data stored on the hard drive. Please backup important data before
formatting a hard drive.
Summary of Contents for DNS-321 - Network Storage Enclosure Hard Drive...
Page 1: ......