D-Link DNS-31 User Manual
Section - Installation
3. Insert a 3.5” SATA hard drive into an available drive
bay. Make sure to align the drive connector to the SATA
connector on the bottom edge inside the drive bay of the
DNS-321. Gently push the drive in until it connects. When
a drive is inserted properly, you will feel it “seat” into the
connector. Some hard drives that are thin or oddly shaped
may need to be guided carefully into position. If a drive
is not properly seated, the light will not illuminate after
powering on the device.
4. Attach the faceplate to the front of the device.
Summary of Contents for DNS-321 - Network Storage Enclosure Hard Drive...
Page 1: ......