D-Link DP-G301 - Print Server - Parallel Quick Installation Manual Download

Page: 1 / 12

holders. Software and speciﬁ cations subject to change without notice.

If any of the above items are missing, please contact your reseller.

CD-ROM (Software, Manual and Warranty)

Before You Begin

DP-G301 AirPlus

G Wireless parallel port Print Server

Check Your Package Contents

DP-G301

AirPlus

G 2.4GHz

Wireless Print

Server

5V DC 2.5A Power Adapter

Using a power

supply with a

different voltage rating

will damage this

product and void its

warranty.

This product can be setup

using any current web

browser, i.e., Internet Explorer

6 or Netscape Navigator 7.0

You will need an Ethernet-enabled device, such as a laptop or desktop

computer and a parallel port printer that will connect to the DP-G301.

Important: TURN OFF the power to the printer before

installing the DP-G301.

Summary of Contents for DP-G301 - Print Server - Parallel













Search results

Summary of Contents for DP-G301 - Print Server - Parallel

Reviews:

Related manuals for DP-G301 - Print Server - Parallel

Brands by name

Popular brands

D-Link DP-G301 - Print Server - Parallel, Quick Installation Manual

Search results

Summary of Contents for DP-G301 - Print Server - Parallel

Reviews:

Related manuals for DP-G301 - Print Server - Parallel

Brands by name

Popular brands