14
Using the DPG-2000W
(Continued)
Using Your Wireless Configuration Utility
Select the SSID matching
the
DPG-2000W
’s SSID
displayed on the banner
screen.
The banner page on the projector/monitor screen will display the SSID and the
channel that the
DPG-2000W
is currently set on. The channel number ranges
from 1 – 11 for the US or 1 – 13 for Europe and Japan.
The
DPG-2000W
operates as an Access Point (AP), with an SSID automatically
assigned at each boot up. When the
DPG-2000W
starts up, its SSID will be
displayed on the upper left corner of the monitor/projector.
Wireless configuration will vary depending on the manufacturer of the wireless
card that you are using. Open the Wireless Configuration Utility program (which
may be called a different name) provided by the manufacturer of your wireless
card and modify the settings as follows:
Change the network type to “Infrastructure” mode.
Change the “SSID” of the wireless network adapter corresponding to
the
DPG-2000W
’s SSID displayed on the banner page.
Your wireless configuration utility will indicate if a proper wireless
connection is established between the wireless card and the
DPG-
2000W
.
