27
Web-Based Administration Utility
(Continued)
Select Automatic or Manual.
Operation Mode
Automatic:
Manual:
By default, the
DPG-2000W
uses the automatic mode to
automatically select an unused SSID and the clearest
channel upon boot up. This mode is highly recommended
for ease of use.
Allows you to manually set the SSID and channel.
Once you have made your changes on the Settings page, click “Apply” to save
and apply those settings. The following page will appear. Click “OK” to
continue.
If you wish to edit any of your settings you can click “Cancel” to restore the
Settings page to its original settings. If you need help on any of the settings on
the Settings page, you can click “Help” to go to the Help page for more
information on each setting.
WARNING
You will need to reconfigure your wireless settings to match your newly
assigned WEP settings to reconnect to the Administration Utility.
One of the four WEP keys needs to be selected for
transmitting data frames. The
DPG-2000W
can
de-encrypt received data encrypted in any one of the four
keys, but uses only one of the WEP keys for
transmitting data.
Transmission Key
Selection
