Using the Web Configurator
MAINTENANCE > Firmware Upgrade
Your Print Server can be upgraded with new firmware when it becomes available.
ew firmware will allow you to use functions that are added to your Print Server.
N
New firmware can be uploaded to your Print Server via the following screen:
This screen indicates the current firmware inside your Print Server. To upgrade
firmware, do as follows:
its
WARNING
:
All configuration settings currently inside your Print Server will be
placed by the factory default settings when the new firmware is uploaded to the
rint Server. Make sure that you have saved your current settings to a computer
ive for restoration later. Refer to the preceding section for instructions.
Have the new firmware file ready on a disk or a computer drive. Type in the path of
the target path of the new firmware file, or click
Browse
to browse.
2. Click Upgrade. Your Print Server will start to load the new firmware to its flash
memory. It is very important that you do not turn OFF the power of either the
re
P
dr
1.
D-Link DPR-2000 - User Manual
68
Summary of Contents for DPR-2000
Page 1: ...D Link DPR 2000 WIRELESS G USB 4 PORT MULTIFUNCTION PRINT SERVER Manual Rev 02 June 2009 ...
Page 90: ...TCP IP Printing for Windows Vista D Link DPR 2000 User Manual 85 ...
Page 99: ...TCP IP Printing for Windows XP D Link DPR 2000 User Manual 94 ...
Page 105: ...TCP IP Printing for Windows 2000 Click Next D Link DPR 2000 User Manual 100 ...