DRO-210i Web Configuration
DRO-210i User Manual Page 3-20
End Time
– Configure this to the time until which the policy remains
active starting from the start time. The format of time is Month: Day: Hr:
Min. This field is applicable for One Time Policy only
Status
- Allows user to make particular Policy
enable
o r
disable
. Only
Policies with status as enable can become active.
Policy Table
- Shows all configured Policies and their active periods.
An Always Policy exists by default with the name "Default". This Policy
cannot be deleted.
Outbound Policy(Firewall) Rules
The Router allows user to specify a range of IP addresses, Domain names,
Web Filter Configurations and MAC addresses for connections between
computers on the WAN and computers on user's LAN. The default
firewall rules of Router are as follows: Allow all network traffic going to
Untrusted network from Trusted network. Allow all network traffic from
Untrusted network to access virtual server. Deny network traffic coming
from Untrusted network to access Trusted network and also web
management of Router.
The different outbound policies that can be configured are:
Port Filter
- Port Filter Policy is used to allow or deny network packets
from Untrusted to trusted network. It is based on the Transport type and
port number. When Enable is selected and the port filter configuration is
made, the allowed packets in the configuration are allowed to pass through
the firewall. The packets that are not allowed in port filter configuration
are dropped.
Domain Filter
– When Enable is selected; the Domain Filter will be
applied to packets going from trusted to Untrusted.
·
Allow all WAN Domain to be accessed e x c e p t
"Untrusted
Domain”
. The lists of Domain names listed in Untrusted Domain are
not allowed into trusted network.
