23
Using the Configuration Utility (continued)
Enable DHCP Server (continued):
Start IP
Address:
Public LAN > VLAN > DHCP Configuration (continued)
Enter the starting IP address of the pool, from which the
DHCP server will assign to the DHCP-enabled devices
(clients) on the network.
DHCP Scope
Enter the last IP address in the sequence of addresses from
which the DHCP server will assign addresses.
End IP
Address:
Enter the IP address of the preferred DNS server.
Primary
DNS Server:
Enter the IP address of the alternate DNS server.
Secondary
DNS Server:
Select the length of time during which the DHCP assigned
address will be in effect.
Lease Time:
Enter the domain name.
Domain Name:
Enter the WINS server’s IP address (if present).
WINS
IP Address:
Note: The DHCP client will attempt to re-obtain its IP lease after half of the lease
time has already expired. Using a low number will increase traffic on the network.