background image

29

Using the Configuration Utility (continued)

Authentication Methods>Local>Local Users List

The user’s account information is stored in the DSA-5100. If you need to manage the
user’s account, please click the hyperlink Local Users List on the Authentication Server
interface to enter into the Account Management Interface, shown below.

User List:

 

 

It provides a complete list of existing user accounts, including information
such as Username, Password, MAC, 

Max Bandwidth, Request 

               Bandwidth, 

Group, and Remark. The

 

administrator can delete 

              

or search for a single user from this

 

management interface.

  

                     

( Note: Max Bandwidth is the amount of maximum transmission capacity available

                          on a network at any point in time. Request Bandwidth represents the amount of 

                          minimum transmission capacity that is available on a network at any point in time.)
 

Delete All:

      

Click here to delete all user accounts

.

Edit:

                 

To

 edit the content of an individual user account, click the hyperlink of

the selected user account to enter the edit mode.

Refresh:

        Click 

here to show the most updated user account information

Edit Account:

Make changes to the
account by clicking on
the  Username. When
the screen on the next
page appears, edit the account information.

Add User:

Create new accounts,including

Username 

(mandatory), 

Password

(mandatory) and 

MAC 

(optional),

Max Bandwidth (optional), Request 
Bandwidth (optional) and assign to 
a user group

.

Authentication Methods > Local  > Local Users List  > Add User

Summary of Contents for DSA 5100 - Airspot - Gateway






























































































Reviews: