4
8
Using the Configuration Utility (continued)
IP Pass Through Configuration
Network Configuration > Network Address Translate (continued)
When any user attempts
to connect to a
destination defined in
this interface, the
connection packet will
be converted to the
c o r r e s p o n d i n g
destination. You can
define up to 40 groups
for redirection on this
interface. These settings
will be effective
immediately after you
click Apply.
Network Configuration > Privilege List
Port and IP Redirect
To permit a specific
device at the user end to
have network access
without going through
authentication, you only
need to key in the IP
address of the user on
this interface. This
system permits at most
100 IP addresses to
have network access
without going through
authentication. These
settings will be effective
immediately after you
click Apply.
Warning: Permitting specific IP addresses to have network access
rights without going through authentication may cause security
problems.
