DSA-6100 User Guide
104
¾
Default Rule:
It is to specify the default action that the system should perform for the traffic
between all VLAN interfaces as well as the LAN interfaces.
o
Pass All Traffic:
When selected, the system allows all traffic to travel between all VLAN
interfaces as well as the LAN interfaces.
o
Block All Traffic:
When selected, the system does not allow any traffic to travel between all
VLAN interfaces as well as the LAN interfaces.
¾
Exception Rule:
The default action for the traffic between all interfaces could be either
Pass All
or
Block All
. If traffic between any particular interfaces has to be blocked or passed,
administrators will need to create
the custom, exceptional rules to block or to pass the traffic that
are traveling between the selected interfaces.
o
Active:
Select the check box to activate the exception rule.
o
Interface:
Use the drop-down list to select the interfaces where the traffic will be blocked or
passed, according to the Default Rule.
Maximum Concurrent Sessions:
The maximum number of concurrent sessions which is allowed to be
established by each user. Use the drop-down list to select the maximum number of concurrent sessions
which is allowed to be established by each user.
Note:
For more information, please refer to
Appendix F. Session Limit and Session Log
.
