DSA-6100 User Guide
60
4.3.3 Manual Configuration
The administrators who choose to configure an AP manually can utilize this page, in which provides several fields
to be filled in. The supported APs (such as DWL-2100AP) can also be added manually. Enter the related
information of the AP and select a
Template
. Click
Add
and then the AP will be added to the
List
. Similar to the AP
added after discovery, a manually added AP will show up with a status of “configuring” in the AP List initially. The
system will attempt to configure the AP with the value specified. A couple of minutes later, the AP’s status will
become “online” or “offline” on the AP List.
y
AP Type:
The type of supported AP.
y
AP Name:
The mnemonic name of the specific AP.
y
Admin Password:
The password of the AP for the system to access it.
y
IP Address:
The IP address of the AP.
y
MAC Address:
The Media Access Control (MAC) address of the AP.
y
Remark:
The administrator can add some extra information for the AP in this field if desired.
y
Template Applied:
The template which will be applied to the AP.
y
Channel:
The RF channel to be used in the added AP.
