2
2
Hardware Installation
Installation of a D-Link DU-C300 requires installation of
the camera hardware itself, and then installation of the
software drivers.
Installing the Camera
Please verify that you have Windows 98 or Windows NT running and
working before attempting to install your DU-C300.
Install the camera by plugging its USB type ‘A’ connector into an
available USB port on your PC or on any USB hub attached to your
PC.
No power adapter is
required, the DU-C300 is
powered directly by the
USB Bus.
Once the camera has
been plugged in the
Add New Hardware
Wizard will start
automatically. This
concludes the hardware installation section of the manual.