![background image](http://html.mh-extra.com/html/d-link/dsl-2544n/dsl-2544n_user-manual_75672034.webp)
Section 3 – Web Configuration
D-Link DSL-2544N User Manual
32
Security Settings
In the
Wireless Settings
page, click
Security Settings.
The page is shown as
the figure appears on the right. This page allows you to select a security mode.
Note that depending on the network authentication that is selected, the page will
change accordingly so additional fields can be configured for the specific security
mode.
Select SSID:
Select the SSID that you want to configure from the drop-down list.
For the description of
Work Mode
field, please refer to the description of
Wireless
Security Mode
in
2.4G Wireless
.
WPS Settings
In the
Wireless Settings
page, click
WPS Settings
. The page shown as the
figure appears on the right. In this page, you can configure Wi-Fi Protected Setup
(WPS).
Note:
Before you configure WPS, please make sure you have configured the
Authentication Type to
WPA
,
WPA2
or
WPA/WPA2
.
The following describes the parameters in this page.
Field
Description
Wireless SSID
Name of wireless network
WPA Mode
Set the security type of wireless network.
Enable WPS
To enable or disable WPS.
Push Button
Push the
PBC
button to begin communication.
Input PIN Number
Enter the station PIN from the wireless client, and
then click the
PIN
button to establish the
connection.
WPS Session Status The status of WPS connection.
If you are using the PIN method, you will need a Registrar (access point/wireless
router) to initiate the registration between a new device and an active access
Summary of Contents for DSL-2544N
Page 1: ......