DSL-2640U/NRU
Quick Installation Guide
Configuring Wireless Network
By default, the wireless network of the router is open (it requires no password
to access it). To avoid unauthorized access to your wireless local area network,
change the default settings of the router.
Example of Wireless Settings
1. Go to the
Wi-Fi / Security settings
page.
2. Select the
WPA-PSK
value from the
Network Authentication
drop-
down list.
3. Enter a key (a password that will be used to access your wireless
network) in the
Encryption Key PSK
field. Use digits and Latin
characters.
4. Select the
AES
value from the
WPA Encryption
drop-down list.
5. Click the
Change
button.
!
If you perform initial configuration of the router via Wi-Fi connection,
note that immediately after changing the wireless default settings you
will need to reconfigure the wireless connection using the newly
specified settings.
14
