38
D-Link DSL-2740R
Section 3 - Configuration
Local Network
You can configure the LAN IP address to suit your preference. Many users will find it convenient to use the default settings together with DHCP
service to manage the IP settings for their private network. The IP address of the router is the base address used for DHCP. In order to use the router
for DHCP on your LAN, the IP address pool used for DHCP must be compatible with the IP address of the router. The IP addresses available in the
DHCP IP address pool will change automatically if you change the IP address of the router.
To access the
Local Network
settings window, click on
Local Network
in the SETUP directory.
ROUTER SETTINGS
To change the
Router IP Address
or
Subnet Mask
, type in the desired values.
DHCP SERVER SETTINGS (OPTIONAL)
The
Enable DHCP Server
is selected by default for the router’s Ethernet
LAN interface.
Set the
DHCP IP Address Range
and the default is from 192.168.1.2
to 192.168.1.254. The IP address pool can be up to 253 IP addresses.
Set the
DHCP Lease Time
in number of hours. The default value is 72.
If you don’t want DSL-2740R to be the DHCP server, you can enable
DHCP
relay
to pass the DHCP discover packets of the clients to another DHCP server.
Please set the DHCP server IP address in
DHCP Server IP Address
.
Summary of Contents for DSL-2740R
Page 1: ......