DSL-2740U/NRU
Quick Installation Guide
4. Select the
Obtain an IP address automatically
radio button. Click
the
OK
button.
Click the
ОК
button. Now your computer is configured to obtain an IP address
automatically.
PC with Wi-Fi Adapter
1.
To connect the router to a DSL line
: connect a phone cable between the
DSL port of the router and the
ADSL OUT
port of the splitter. Connect
your phone to the
PHONE
port of the splitter. Then connect another
phone cable between a phone jack and the
ADSL IN
port of the splitter.
2.
To connect the router to an Ethernet line
: connect the Ethernet cable
between any of four Ethernet ports located on the back panel of the router
and the Ethernet line.
3. Connect the power cord to the power connector port on the back panel of
the router, then plug the power adapter into an electrical outlet or power
strip.
4. Turn on Wi-Fi: push the relevant button on the back panel of the router.
5
