Section 3 - Configuration
D-Link DSL-2880AL User Manual
34
Manual WIRELESS Connection Setup SETTINGS
DSL-2880AL comes with 2 physical wireless interfaces (known 2.4GHz
and 5GHz).
Click on the
Enable Wireless
box to activate the wireless interface. You
can use the
Add New
button to create a schedule and apply to the
wireless interface. (Remark: To have scheduler operate properly, please
ensure you have activated NTP BEFORE you create a new schedule.)
The
SSID
identifies members of the Service Set. Accept the default name
or change it to something you desire. Every time you change the SSID, all
the previous connected wireless client(s) will lost connection. In order to
get the wireless connection back, all the wireless client(s) MUST
re-associate to the new SSID again.
How to configure wireless channel?
Enable Auto Channel Scan
so that the router can select the best possible
channel for your wireless network to operate on.
The
Wireless Channel
which allows you to specify the wireless channel of
your access point employs. We would strongly recommend you to leave
the setting as AUTO to prevent wireless interference.
Note: Amount of wireless channel available may various in different
countries due to difference in regulation.
Suggestion from configuring 802.11 mode
Select
802.11 Mixed Mode
if you are not sure which type of wireless client
may associate to this wireless interface or specify the desired wireless
mode to employ.
